{"product_id":"ex-trafire-85hd-hand-torch-50ft","title":"EX-TRAFIRE® 85HD Hand 50 ft — 85 A Plasma Cutting System, 200–600 V, FHT-EX® 105TTH Torch | Thermacut®","description":"\u003cp\u003e\u003cstrong\u003eThe EX-TRAFIRE® 85HD is the lightest machine in the HD line and the one most shops start with — 66 lb, multi-voltage, and still rated to sever 2 in plate.\u003c\/strong\u003e This is the hand-torch system: a complete, ready-to-cut package built around Thermacut®'s award-winning FHT-EX®105TTH torch on a 50 ft (15 m) lead — configured for handheld cutting, gouging and marking.\u003c\/p\u003e\u003cp\u003eEvery EX-TRAFIRE® HD runs \u003cstrong\u003efour processes from one machine\u003c\/strong\u003e: cutting, grid (expanded-metal) cutting, gouging and marking. You are not buying a cutter and then buying a marker — the machine identifies the gas, sets pilot current and pressure itself, and compensates for pressure drops as you cut. Fewer operator variables, more repeatable edges.\u003c\/p\u003e\u003ch3\u003eWhy shops buy this machine\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% duty cycle at 76 A on 460–575 V three-phase.\u003c\/strong\u003e Duty cycle is where cheap plasma dies. This one is rated for continuous production, not a 40-second burst and a cool-down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne machine, any shop power.\u003c\/strong\u003e Runs 200–600 V, single- or three-phase, 50\/60 Hz. The same unit that works off 240 V single-phase in a small fab shop works off 600 V three-phase in a plant — which matters if you move it, rent it out, or don't yet know what service the next job site has.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-3\/8\" recommended capacity, 2\" severance, 1\" pierce\u003c\/strong\u003e on low-alloy steel, plus 17 lbs\/hr gouging removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFHT-EX®105TTH torch, tool-free consumable changes.\u003c\/strong\u003e A design-award-winning torch on Thermacut®'s Torch Connection System (TCS) — swap the whole torch, or just the consumables, without tools and without a service call.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry 4.0 ready.\u003c\/strong\u003e CNC port fitted as standard; optional CAN \/ RS-485 \/ RS-422 bus interface if you later mechanize.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts on air, nitrogen or argon.\u003c\/strong\u003e Air for everyday mild steel; nitrogen for stainless and aluminium; argon with the optional marking kit for fine, smooth marking below 20 A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumables you can actually afford to run.\u003c\/strong\u003e Thermacut® builds the machine \u003cem\u003eand\u003c\/em\u003e the consumables — so the running cost stays low for the life of the machine, and you order the parts from the same place you bought the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20–85 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput amperage — single phase\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20–65 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput amperage — three phase\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20–85 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCutting · Grid cutting · Gouging · Marking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended cutting capacity*\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeverance cutting capacity*\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePiercing capacity*\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGouging removal rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e17 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDuty cycle @ 104 °F\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55% @ 65 A \/ 100% @ 50 A (1 × 230 V)\u003cbr\u003e40% @ 85 A \/ 100% @ 54 A (3 × 208 V)\u003cbr\u003e80% @ 85 A \/ 100% @ 76 A (3 × 460–575 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × 200–240 V \/ 3 × 208–575 V ± 15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated output voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e140 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlasma gas\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompressed air \/ nitrogen \/ argon**\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir flow cut pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e75 PSI (recommended supply 90–145 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTorch gas flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e101 l\/min at 5.2 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTorch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFHT-EX®105TTH, 50 ft (15 m) lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCNC interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCNC port standard (STD EQUIPPED). CAN \/ RS-485 \/ RS-422 optional.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP23S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInsulation class\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply dimensions (L × W × H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22\" × 15.7\" × 10.2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e66 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThermacut® part number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEX-4-010-063\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003csmall\u003e* Values for low-alloy steel (e.g. MS S235JR). ** Argon is for use with the optional fine-marking kit only.\u003c\/small\u003e\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEX-TRAFIRE® 85HD power supply (multi-voltage 200–600 V)\u003c\/li\u003e\n\u003cli\u003eFHT-EX®105TTH hand torch with 50 ft (15 m) lead and TCS13 connection\u003c\/li\u003e\n\u003cli\u003eHand torch starter consumable kit — 4 electrodes, 4 nozzles, 4 shields, swirl ring and torch-body O-ring\u003c\/li\u003e\n\u003cli\u003eWork lead with clamp\u003c\/li\u003e\n\u003cli\u003eOperator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConsumables and support\u003c\/h3\u003e\u003cp\u003eThis system runs FHT-EX®105TT consumables — electrodes, nozzles, retaining caps, swirl rings, shields, gouging and marking sets. We supply them, so the machine you buy here is the machine we keep running. Not sure which amperage set you need? Email \u003ca href=\"mailto:office@torchandtip.com\"\u003eoffice@torchandtip.com\u003c\/a\u003e and we will build the reorder list for your cutting.\u003c\/p\u003e\u003ch3\u003eBuying from TorchandTip.com\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSold by an \u003cstrong\u003eauthorized Thermacut® distributor\u003c\/strong\u003e — genuine equipment, backed by the Thermacut® manufacturer warranty.\u003c\/li\u003e\n\u003cli\u003ePriced in \u003cstrong\u003eCAD\u003c\/strong\u003e, ships from within Canada — no cross-border brokerage, duty or exchange surprises.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree freight, anywhere in Canada.\u003c\/strong\u003e Systems ship at no delivery cost to any physical shipping address in the country — coast to coast and north, no thresholds and no regional surcharges. Pallet freight, so no PO boxes.\u003c\/li\u003e\n\u003cli\u003eQuestions on voltage, torch length or table fitment before you buy? Email \u003ca href=\"mailto:office@torchandtip.com\"\u003eoffice@torchandtip.com\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003csmall\u003eEX-TRAFIRE®, FHT-EX® and THERMACUT® are registered trademarks of THERMACUT, k.s.\u003c\/small\u003e\u003c\/p\u003e","brand":"Thermacut","offers":[{"title":"Default Title","offer_id":48791425024245,"sku":"EX-4-010-063","price":6372.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/7333\/1701\/files\/Ex-TraFire85.png?v=1788290408","url":"https:\/\/torchandtip.com\/products\/ex-trafire-85hd-hand-torch-50ft","provider":"torchandtip.com","version":"1.0","type":"link"}