A Harris® cutting tip carries two pieces of information in its part number: the series, which tells you the fuel gas and the torch it belongs in, and the size, which tells you how thick a plate it cuts.
Read both and you'll order the right tip the first time. Read only the size and you can end up with a tip built for the wrong gas, or for a torch you don't have.
Start with the series
Everything after "6290" is the series. It answers two questions: what gas, and what torch.
| Series | Fuel gas | What it's for |
|---|---|---|
| 6290 | Acetylene | One-piece, general-purpose cutting |
| 6290-NX | Propane / natural gas | General-purpose cutting |
| 6290-NFF | Propane / natural gas | Heavy preheat, for rusty or scaled plate |
| 6290-VVC | Propane / natural gas | Machine cutting, plated |
| 6290-VVCU | Propane / natural gas | The same machine tip, un-plated |
The gas matters more than anything else on that list. An acetylene tip and a propane tip are built for different flames. Some Harris® torches and attachments run alternate fuel only and never take an acetylene tip, the 39-3F attachment and the 98-6F machine torch among them.
Then read the size
The size is the number on the end. The bigger the number, the thicker the plate the tip is rated to cut.
For the plain 6290 acetylene tips and the 6290-NX propane tips, the size ladder runs the same way:
| Size | Plate thickness |
|---|---|
| 000 | light gauge to 3/16" |
| 00 | 3/16" to 3/8" |
| 0 | 3/8" to 5/8" |
| 1 | 5/8" to 1" |
| 2 | 1" to 2" |
| 3 | 2" to 3" |
| 4 | 3" to 6" |
Same size number, same plate, whichever of those two gases you run. The torch still has to suit the gas, but the size you're used to carries over.
The one that doesn't follow the rule
6290-NFF runs on a different scale. It's a heavy-preheat tip, built for rusty or scaled plate, and its size numbers don't line up with the NX series. A size 1 NFF covers light gauge to 5/8", a range the NX series spreads across three sizes.
| NFF size | Plate thickness |
|---|---|
| 1 | light gauge to 5/8" |
| 2 | 5/8" to 2" |
| 3 | 2" to 4" |
| 4 | 4" to 6" |
| 5 | 6" to 8" |
| 6 | 8" to 10" |
Never swap an NX for an NFF, or the other way around, by matching the number. Match the plate thickness instead.
Machine tips have their own ladder
The 6290-VVC and VVCU tips are machine cutting tips, and they use their own size ladder, from 000 for 1/4" to 3/8" plate up to size 5 for 8" to 9". The VVCU is the same tip as the VVC without the plating, rated to the same plate.
One thing that trips people up here: Harris®'s own machine-tip chart writes the small sizes as fractions. 3/0 is the same size as 000, 2/0 is 00, and 0-1/2 is 1/2. If your chart says 3/0 VVC, you want a 000.
Running a Harris® V-Series torch?
Then none of the above applies. Harris® V-Series torches, such as the V62-5E and V62-5F, use Victor®-style conical tips, not 6290 tips. Harris® built them for shops that already stock Victor®-style tips. Browse Victor®-compatible tips →
The short version
- Series first. It tells you the gas and the torch.
- Size second. It tells you the plate. On machine tips, 3/0 is 000 and 2/0 is 00.
- NFF is the exception. Match it by plate thickness, not by number.
- V-Series torches take Victor®-style tips.
Pick your torch, pick your gas, get the tip. Our Harris® tip finder walks you to the right tip with the plate thickness each size is rated for. Free, no account needed. Find your Harris® tip →
TorchandTip.com sells Thermacut® cutting tips compatible with Harris® and Victor® torches across Canada. Plate thickness figures for the 6290, NX and NFF series are Harris® published cutting-chart data; the VVC and VVCU figures are Thermacut®'s own published range. Harris® is a registered trademark of The Harris Products Group. Victor® is a registered trademark of The ESAB Group, Inc. TorchandTip.com and Thermacut® are not affiliated with, authorized by, or endorsed by either company. Brand names are used here only to identify the equipment these parts fit.
0 commentaire