Single or Double Laser Nozzle? How to Pick One and Read the Part Name

|Gregg Hinton
Single and double chrome plated laser cutting nozzles

The nozzle is the cheapest part on a laser cutting head, and one of the easiest to get wrong. Pick the wrong type and the cut edge shows it. Order from the wrong line in a catalogue and you have a box of nozzles that don't fit your head.

Here's how to tell single from double nozzles, what the size means, and how to read the part names in our laser range so you order the right one.

What the nozzle does

  • It shapes the assist gas. The gas leaves the nozzle around the beam and blows molten metal out of the kerf. The shape and size of the orifice decide how that gas column behaves.
  • It shields the optics. It sits between the cut and the protection window, taking the spatter and heat.
  • On most cutting heads it's part of the height control. The head senses the distance to the sheet through the nozzle, which is why a dented, dirty or loose nozzle can make the head lose its height.

Single or double?

Single nozzle Double nozzle
Built as One gas channel An inner and an outer nozzle, two gas paths
Usually used for Nitrogen or air cutting: stainless steel and aluminum Oxygen cutting of mild steel
Why A straight, high-pressure gas jet clears melted metal for a clean, bright edge A steadier gas column around the cut keeps the oxygen reaction going for a cleaner edge on steel

That's the general rule. Your machine's cutting tables are the final word: they list the nozzle type, size and gas pressure for each material and thickness, and the right nozzle is the one the table calls for.

What the size means

The number in millimetres is the orifice diameter: 1.2 mm, 2.0 mm, 3.0 mm and so on. As a rule, thicker material takes a larger orifice so the gas can move more volume through a wider kerf. Changing the size changes the gas flow, so change the size only to match the cutting table.

How to read our laser part names

Every laser product title follows the same pattern. Take this one:

THERMACUT® HG10.595 Double Nozzle 2.0mm HCP (Pack of 10) – Suitable for Amada® Laser

  • HG10.595 is the Thermacut® part number.
  • Double Nozzle is the type. A plain "Nozzle" is a single nozzle.
  • 2.0mm is the orifice size. Some Amada®-style names put a letter in front: S1.5mm is a single nozzle and D2.5mm is a double.
  • CP means chrome plated, and HCP means hard chrome plated. Plating helps the nozzle shed spatter and makes it easier to clean.
  • Eco Cut, WACS and Clean Cut are the machine maker's own nozzle families. TRUMPF®-style nozzles carry their own codes the same way, such as ECE, EAA or EBF. We keep those names in our titles so you can match the nozzle on your shelf.
  • Pack of 10 is how it ships.

Every product page also lists the OEM reference number the part crosses to. If you have the number off your old box, search it. Our cross-reference index has a page for each machine brand.

When to change a nozzle

  • The orifice is nicked, burned or out of round. Hold it up to the light and look.
  • There's spatter welded to the tip that won't clean off.
  • The nozzle is dented from a tip-up or collision.
  • The cut edge has gone rough or uneven and the settings haven't changed.

After fitting a new nozzle, run your machine's nozzle centring check before you go back to production. A nozzle that isn't centred to the beam gives a different edge on one side of the part than the other.

Get them

We carry Thermacut® replacement nozzles, ceramic holders, lenses and protection windows for TRUMPF®, Bystronic®, Amada®, Precitec®, Mazak® and more, filterable by bore size and machine.

Shop laser consumables →


THERMACUT® is a registered trademark of THERMACUT, k.s. TRUMPF®, Bystronic®, Amada®, Precitec® and Mazak® are trademarks of their respective owners. TorchandTip.com is not affiliated with any laser machine manufacturer; their names and part numbers are used for identification only.

0 commentaire

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant leur publication.