Victor® Cutting Tips: How to Read the Number

|Gregg Hinton
Victor cutting tip number 2-1-101 read left to right: size, series, type

A Victor® cutting tip number looks like 2-1-101. Three pieces, and each one answers a different question: how thick, which torch, and what gas.

Victor® puts them in a different order from Harris®, which is easy to trip on. Here's how to read one.

Read it left to right

Take 2-1-101:

Piece Means Tells you
2 Size how thick a plate it cuts
1 Series which torches and attachments it fits
101 Type the fuel gas and the job

Size comes first on a Victor® tip. On a Harris® tip it comes last. If you run both brands in the same shop, that's the one to watch.

The series has to match your torch

The middle number is the series, and the two you'll see most are Series 1 and Series 3. The series is a fitment, not a grade. Your torch or cutting attachment takes one series, and the tip has to match it.

For example, the Victor® CA1350 cutting attachment, which fits Victor® 100-series handles, takes Series 3 tips.

The fastest way to know yours is the tip you're replacing. Read the middle number off the old tip and order the same series.

The type tells you the gas and the job

Type What it is
101 Acetylene cutting tip
GPN Propane / natural gas cutting tip
GPP Propylene cutting tip
HPN Heavy-wall propane / natural gas cutting tip
MTHN High-speed propane / natural gas cutting tip
118 Gouging, deseaming and weld prep
MFA Heating nozzle

Then the size

The bigger the size, the thicker the plate. On Series 1 GPN propane tips, Victor®'s published ladder runs like this:

Size Plate thickness
000 1/8"
00 1/4"
0 3/8" to 1/2"
1 3/4"
2 1" to 1-1/2"
3 2" to 2-1/2"
4 3"
5 4" to 5"
6 6" to 8"
7 10"
8 12"

The Series 1 Type 101 acetylene tips line up with the same sizes: a size 1 is rated for 3/4" and a size 3 for 2" to 2-1/2".

Running a Harris® V-Series torch?

Harris® V-Series torches, such as the V62-5E and V62-5F, use Victor®-style conical tips, so everything on this page applies to them. If you also run standard Harris® torches, here's how to read a Harris® tip. The numbers work differently.

The short version

  1. Size first. On a Victor® tip, the first number is the size.
  2. Series second. It has to match your torch or attachment. Copy it off the old tip.
  3. Type last. It tells you the gas: 101 acetylene, GPN propane, GPP propylene.

Have the number off your old tip? Search it and you'll land on the part, or browse every Victor®-compatible tip by series, type and size. Shop Victor®-compatible tips →


TorchandTip.com sells Thermacut® cutting tips compatible with Victor® and Harris® torches across Canada. Plate thickness figures are Victor®'s published cutting data. Victor® is a registered trademark of The ESAB Group, Inc. Harris® is a registered trademark of The Harris Products Group. TorchandTip.com and Thermacut® are not affiliated with, authorized by, or endorsed by either company. Brand names are used here only to identify the equipment these parts fit.

0 commentaire

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant leur publication.