ABICOR Binzel® ABIMIG® W 440 LW Water-Cooled MIG Welding Torch, 500 A — Fixed Neck
Price depends on cable length. Your exact price and ordering code show in the builder below.
Full-shift heavy welding on a fixed neck. The ABIMIG® W 440 LW is ABICOR Binzel®'s water-cooled MIG welding torch, rated 500 A on CO₂ and 450 A on mixed gas at 100% duty cycle. It ships complete with the connector for your machine: Miller®, Lincoln®, ESAB®, Tweco®, Hobart® or Fronius®.
Need a neck you can swap? See the ABIMIG® WT 440, with a rotating, interchangeable neck.
You need a water cooler. A water-cooled torch runs on a recirculating cooler. ABICOR Binzel® recommends a cooler of about 800 W cooling capacity, and a cool-down of at least four minutes after welding. If your machine has no cooler, choose an air-cooled ABIMIG® torch instead.
Why the ABIMIG® W
- Up to 500 A at 100% duty cycle. Water carries the heat away from the neck and consumables, so the torch keeps welding at amperages an air-cooled torch can't hold.
- Fixed neck, fewer parts. A one-piece threaded 50° neck, nothing to set or adjust.
- Nickel-plated front end. Nickel plating from neck to nozzle resists spatter build-up.
- A handle built for the wrist. A slim handle with a ball-joint base gives the cable more range of motion. Order it with a standard or extended trigger.
- Made by ABICOR Binzel®. ABIMIG® is ABICOR Binzel's own torch line, designed and built by Binzel.
Specifications
| Rating (EN 60974-7) | 500 A CO₂ / 450 A mixed gas (M21) / 350 A pulse |
| Duty cycle | 100% |
| Wire size range | .035"–1/16" (0.9–1.6 mm) |
| Contact tip thread | M8 |
| Cooling | Water-cooled (cooler of about 800 W recommended) |
| Neck | Fixed, 50° (neck 766.1548) |
| Trigger | Standard or extended |
| Cable lengths | 10 ft, 12 ft, 15 ft, 20 ft, 25 ft |
Choose your machine
Pick the connection that matches the welder or wire feeder the torch plugs into.
| Option | Fits |
|---|---|
| Miller | Miller® wire feeders and welders with the standard Miller® direct connection |
| Lincoln (external gas) | Lincoln® machines with a separate (external) gas connection |
| Lincoln 10 series | Lincoln® 10-series wire feeders |
| Lincoln Power MIG | Lincoln® POWER MIG® welders |
| ESAB / Tweco / Hobart | ESAB®, Tweco® and Hobart® machines with the Tweco®-style connection |
| Fronius / Euro | Fronius® machines, and any welder or feeder with a standard Euro connector |
Questions
Do I need a water cooler?
Yes. The torch must be connected to a recirculating cooler with coolant flowing before you weld. Running it without coolant will damage the torch.
Will it fit my Fronius®?
Yes. Fronius® MIG systems use the open Euro connector. Choose Fronius / Euro.
Will it fit my ESAB®?
Yes. ESAB® machines use the Tweco® connection. Choose ESAB / Tweco / Hobart.
What contact tips does it take?
The W 440 uses M8 thread contact tips.
Ships anywhere in Canada.
ABIMIG® and ABICOR Binzel® are trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG. TorchandTip.com is not affiliated with Illinois Tool Works Inc., The Lincoln Electric Company, ESAB or Fronius International GmbH. Miller® and Hobart® are trademarks of Illinois Tool Works Inc. or its subsidiaries. Lincoln® and POWER MIG® are trademarks of The Lincoln Electric Company. ESAB® and Tweco® are trademarks of ESAB. Fronius® is a trademark of Fronius International GmbH. These names identify the machines this torch connects to.
Build Your MIG Welding Torch
Pick the torch, air or water cooling, your machine, the amperage you weld at and your wire size. We show the matching torch and the consumables that fit it.
Torch two torch families, both built by ABICOR Binzel®
Cooling water-cooled torches need a recirculating cooler
Your machine the welder or wire feeder the torch plugs into
Amperage pick the torch rated for how hard you weld
Neck style swappable or fixed
Cable length
Wire size
Gooseneck angle every welder has a favourite
The torch ships with the 60° standard gooseneck fitted. Pick a different angle and we add that gooseneck to your order. It swaps in under a minute and you keep the 60° as a spare. The 60° standard gooseneck is part of the torch and can’t be returned or exchanged on its own.
ABIMIG® and ABICOR Binzel® are registered trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG. TorchandTip.com is not affiliated with Illinois Tool Works Inc., The Lincoln Electric Company, ESAB or Fronius International GmbH. Bernard®, Centerfire™, Miller®, Millermatic® and Hobart® are trademarks of Illinois Tool Works Inc. or its subsidiaries. Lincoln®, POWER MIG® and Power Feed® are trademarks of The Lincoln Electric Company. ESAB® and Tweco® are trademarks of ESAB. Fronius® is a trademark of Fronius International GmbH. These names identify the machines these torches connect to.