FEX PRO Mobile Fume Extractor, 110–230 V
Light, quiet source capture for TIG and light MIG. The FEX PRO is ABICOR Binzel®'s compact mobile high-vacuum extractor. Pair it with an xFUME® PRO or xFUME® TIG fume extraction torch and it pulls fume right at the arc, at under 60 dB(A). It also works with torches fitted with external extraction and with a magnetic funnel nozzle.
Why the FEX PRO
- Plugs in anywhere. Auto-sensing 110–230 V, 50/60 Hz, on a standard NEMA 5-15P plug.
- Two-stage filtration. A cleanable class M filter cartridge catches the bulk of the dust, then a HEPA H14 main filter takes out 99.997% of particles down to 0.3 µm.
- Self-cleaning with shop air. Hook up compressed air, open the valve and work the cleaning lance up and down to blow the cartridge clean. Dust drops into a pull-out collecting container.
- Adjustable airflow. Up to 117 CFM (200 m³/h) and 23,000 Pa of vacuum from a 1.1 kW blower. Turn it down when you can: running faster than you need shortens filter life.
- Warns you when filters are loaded. A differential pressure switch watches the airflow; the service LED turns orange and an alarm sounds when the filters need cleaning or changing.
- Auto start/stop option. Set the Auto/Manual switch to Auto and add a current clamp (601.0041, 1.5 m, or 601.0277, 5 m) and it runs only while you weld. An hour meter tracks run time for maintenance.
- Easy to move. 44 lb (20 kg).
Specifications
| Part number | 601.0381 |
| Power | 110–230 V, 50/60 Hz, auto-sensing, NEMA 5-15P plug, 16 A mains fuse |
| Blower | 1.1 kW brushless tangential discharge blower |
| Max. airflow | 117 CFM (200 m³/h), adjustable |
| Max. vacuum | 23,000 Pa |
| Connection | 1 port, 50 mm (2 in) extraction hose |
| Filter cartridge | Class M, 0.8 m², cleanable with compressed air (601.0383) |
| Main filter | HEPA H14, 1.52 m², 99.997% at 0.3 µm and 95% at 0.01 µm (601.0382) |
| Sound level | Under 60 dB(A) |
| Size | 22.5 × 12 × 20.7 in (573 × 305 × 527 mm) |
| Weight | 44 lb (20 kg) |
| Operating range | +10 °C to +50 °C, up to 90% relative humidity, up to 1,000 m altitude |
| Controls | Start button, airflow regulator, Auto/Manual switch, service LED with alarm, hour meter, circuit breaker reset, current clamp port |
| In the box | FEX PRO extractor. The extraction hose (601.0396) and the auto start/stop current clamp (601.0041 or 601.0277) are ordered separately. |
Maintenance
- Every 2 hours of welding, or when the service LED lights: clean the filter cartridge with compressed air.
- Daily: check the fume is being drawn in at the torch, and empty the dust collecting container into a sealed dust bag.
- Weekly: check the extraction hose for damage and build-up.
- Every 6 months (one-shift use): change the filter cartridge (601.0383) and the HEPA main filter (601.0382). The main filter can't be cleaned. Change both sooner on multi-shift work.
Where it fits
For welding, grinding and thermal cutting of steel with under 30% combined nickel and chromium. Not for aluminum or magnesium dust, oil-wetted parts, flammable materials, or fume containing CMR (carcinogenic, mutagenic or reprotoxic) substances. Set it on a level, dry floor at least 1 m (3 ft) from the wall, and keep it out of the weather. The cleaned air returns to the room, so the shop still needs general ventilation.
Questions
FEX PRO or xFUME® ADVANCED?
The FEX PRO is the light, one-port unit for TIG and light MIG. For heavier MIG, two welders, or the xFUME® PRO 501, choose the xFUME® ADVANCED.
Does it start by itself when I strike an arc?
Yes, with the optional current clamp (601.0041 or 601.0277) and the switch set to Auto. Clip it over the welding cable with the red dot pointing in the direction of current flow. In Manual you start and stop it with the start button.
Do I need compressed air?
Yes, to clean the filter cartridge. Connect shop air only while cleaning, then disconnect it.
New to fume extraction? Watch ABICOR BINZEL's four-minute introduction: what welding fume does in the shop and how to start cleaning the air. Watch the video →
Ships anywhere in Canada.
xFUME® and ABICOR Binzel® are trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG.