ABICOR Binzel® FreedomDrive™ AT 355 Push-Pull MIG Welding System
Push-pull without the heavy torch in your hand. FreedomDrive™ moves the push-pull drive about 6 ft down the cable, so you weld with a light ABIMIG® AT 355 torch and handle while the drive pulls the wire. Up to 55% lighter than competing push-pull and spool torches, with internal routing of gas, power and control wires so the cable doesn't snag.
Specifications
| Rating (EN 60974-7) | 340 A CO₂ / 320 A mixed gas (reduce by 35% for pulse welding) |
| Duty cycle | 60% |
| Torch | ABIMIG® AT 355, air-cooled |
| Neck | 60° rotating |
| Front cable | 6 ft, from the drive to the torch |
| Total length | 20 ft or 30 ft |
| Wire size range | .030"–1/16" (0.8–1.6 mm) |
| Drive | Dual drive rolls, spring tensioned, incher button |
Choose your machine
| Lincoln 7-pin / 12-pin | Lincoln® push-pull ready power sources |
| Miller 10-pin | Millermatic® 252, 255, 350P (not the 350P Aluminum model), 355, XMT®, XR Control and XR Alumafeed |
| Binzel Euro | Any push wire feeder, through a wire feeder adaptor kit where needed and power control box 284.0660 (both sold separately) |
Good to know
- Uses the same handle and consumables as the ABIMIG® AT 355 MIG welding torch.
- Ships as a complete system: torch, FreedomDrive™, front and rear cables.
Ships anywhere in Canada.
ABICOR Binzel® and ABIMIG® are trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG. TorchandTip.com is not affiliated with Illinois Tool Works Inc., The Lincoln Electric Company or ESAB. Miller® and Millermatic® are trademarks of Illinois Tool Works Inc. or its subsidiaries. Lincoln® is a trademark of The Lincoln Electric Company. ESAB® and Tweco® are trademarks of ESAB. These names identify the machines this torch connects to.