Fill a plasma water table with plain water and it works fine for a few weeks. Then the slats start to rust. Fresh-cut parts come off the table with a coat of orange flash rust. And one Monday morning you open the shop door and the table smells like a swamp.
None of that is the water's fault. Plain water just isn't built to sit in a steel tank for months. Plasma table fluid is.
What plain water does to a table
A water table catches the sparks, slag and fumes from the cut, and it keeps the plate cool so it doesn't warp. To do that, the water sits in contact with steel every day: the tank, the slats, the plate and the parts. Plain water causes three problems:
- It rusts the slats and the table. Rusted slats don't support the plate flat, and a rusted tank is an expensive repair.
- It flash-rusts your parts. Parts that touch the water come off with a coat of rust you then have to clean off before paint or welding.
- It goes stale and smells. Standing water picks up slag, fines and oil, and over time it fouls.


The clean table is shown with new slats and is for reference purposes only. Table appearance depends on the end user's cleaning, maintenance and use.
What plasma table fluid does
Cantesco® Plasma Arc Water Table Fluid (PATF) is a concentrate you add to the table water. Cantesco® formulates it to stop steel corrosion and foul odours, both in the water table and on the work pieces. The table lasts longer, the slats stay usable longer, and parts come off cleaner.
It's made for plasma cutting water tables used on stainless steel, steel and other ferrous metal. Don't use it on copper or aluminum. If you cut aluminum on a water table, read our post on plasma cutting aluminum with air first. Aluminum on a water table needs its own housekeeping.
How much to add
Add the fluid at 10% of the tank volume, at room temperature.
| Table holds | PATF to add |
|---|---|
| 50 US gallons | 5 US gallons (one PATF-5G carboy) |
| 100 US gallons | 10 US gallons |
| 250 US gallons | 25 US gallons |
| 550 US gallons | 55 US gallons (one PATF-DR drum) |
Then check the mix with pH test strips. You're aiming for pH 9 to 10. Below that, add a little more fluid.
Top up with water, not fluid
Water evaporates from the table. The fluid doesn't. If you top up a low table with more of the water and fluid mix, you double-dose it.
When the level drops, top up with plain water, then check the pH again.
How often to change it
Clean the table out and refill it at least once a year, and sooner if oil or dirt gets into the water. Slag and fines build up in the bottom whatever you put in the water, so the clean-out is part of the job either way.
Storage and safety
- Shelf life: five years unopened, six months once opened. Buy the size you'll use inside six months.
- Safety Data Sheet: Warning, harmful if swallowed. Read the SDS before you store, use or dispose of it. It's on our Safety Data Sheets page in English and French.
What it costs per gallon of table water
| Size | Price | Makes about | Per gallon of table mix |
|---|---|---|---|
| PATF-5G, 5 US gallon carboy | $379.27 | 50 US gallons | about $7.59 |
| PATF-DR, 55 US gallon drum | $3,742.20 | 550 US gallons | about $6.80 |
Prices in CAD. Compare that to new slats, a rusted tank or a stack of parts that need cleaning before they go to paint.
Get it
Our plasma table fluid guide has the full how-to with before and after photos.
Need coolant for the plasma system itself? That's a different product. See the coolant comparison chart.
Cantesco® is a brand of KEMPER SYSTEM.


0 commentaire