What Is BIKOX®? The Cable That Makes the ABIMIG® MIG Welding Torch Lighter

|Gregg Hinton
ABICOR Binzel ABIMIG AT MIG welding torch with its lightweight BIKOX cable assembly

Pick up a MIG welding torch and the handle feels light. Weld with it for eight hours and it doesn't. The difference is the cable.

When you're welding, you aren't just holding the handle. You're holding up the part of the cable assembly that hangs between your hand and the floor or the bench, and you're dragging it every time you move. That's most of what your wrist and forearm feel by the end of a shift.

BIKOX® is ABICOR Binzel®'s answer to that. It's the cable assembly on the ABIMIG® A and AT LW torches we carry, and it's the reason the "LW" stands for lightweight.

What BIKOX® is

BIKOX® is ABICOR Binzel's own cable assembly design, a registered trademark of the Binzel group. It carries everything a MIG welding torch needs between the machine and the handle: the welding current, the shielding gas, the wire through its liner, and the trigger signal.

What sets it apart is weight. ABICOR Binzel rates the BIKOX® LW cable assembly at up to 50% lighter torch weight than conventional designs. On their heavy-duty BIKOX® cable built for shipyard work, they also rate it as heat-resistant and abrasion-resistant, built to stand up to UV, high temperatures and flying weld spatter.

Why the cable is the part that matters

Torch weight on a spec sheet is usually the torch sitting on a scale. That isn't what you feel. What you feel is handling weight: the load in your hand when you're holding the torch at working height with the cable hanging off it.

ABICOR Binzel measures exactly that. At a 5 ft working height, their ABIMIG® AT 355 LW comes in at 3.3 lb of handling weight, against 4.0 lb and 4.75 lb for two competing 350 A torches.

Seven-tenths of a pound doesn't sound like much. Hold it out at arm's length for a few hundred welds a day and it is.

What else is on the ABIMIG®

The cable is only part of the torch. The ABIMIG® AT also has:

  • A rotating neck. The AT's neck turns to the angle the joint needs, and comes off completely when you need a different gooseneck. ABICOR Binzel times a neck change at under a minute.
  • A handle built for the wrist. A ball-joint base gives the cable more range of motion at the handle, and the extended trigger is easy to hold through long welds.
  • Goosenecks for the job. 22°, 45°, 60° and 180° bends.
  • A connector for your machine. Miller®, Lincoln®, ESAB®, Tweco®, Hobart® or Fronius®.

The ABIMIG® A is the same torch with a fixed 60° neck, for shops that don't need to swap necks.

What it costs

A lightweight cable usually comes at a premium. On the ABIMIG® it doesn't. The ABIMIG® AT 355 LW with a 15 ft cable is $753.56 CAD with the connector for your machine, and the AT 255, AT 415 and fixed-neck A versions are on the same page.

Not sure which amperage, cable length or connector? Build your torch here. Pick your machine, amperage, cable length and wire size, and it gives you the exact torch and the spare consumables that go with it.


See the ABIMIG® range. The AT 255, 355 and 415, and the fixed-neck A versions. Shop MIG welding torches →


BIKOX®, ABIMIG®, ABICOR® and Binzel® are registered trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG. Miller® and Hobart® are trademarks of Illinois Tool Works Inc. or its subsidiaries. Lincoln® is a trademark of The Lincoln Electric Company. ESAB® and Tweco® are trademarks of ESAB. Fronius® is a trademark of Fronius International GmbH. TorchandTip.com is not affiliated with Illinois Tool Works Inc., The Lincoln Electric Company, ESAB or Fronius International GmbH. These names identify the machines the torch connects to.

0 comments

Leave a comment

Please note, comments need to be approved before they are published.