ABICOR Binzel® PP401D Plus Water-Cooled Push-Pull MIG Welding Torch, 400 A
Water-cooled push-pull for full-shift aluminum welding. The ABICOR Binzel® Push-Pull Plus PP401D carries 400 A at 100% duty cycle, with the pull motor in the handle and adjustable drive roll pressure.
Features

Pull motor and threaded neck
A sturdy pull motor in the handle holds wire speed steady, with no slip from friction. The necks screw off to swap, and come straight or at 45°. They're built on Binzel's proven MB neck design.

Pistol-grip handle
The ergonomic grip cuts fatigue in any position. The neck turns a full 360° in 45° steps. Air-cooled to 300 A, water-cooled to 400 A.

D-shaft and knurled drive rolls
The drive rolls sit on a D-shaped shaft so they can't spin loose. The knurled rolls grip soft aluminum wire without slipping, for steady feed.
Specifications
| Rating (EN 60974-7) | 400 A CO₂ / 350 A mixed gas |
| Duty cycle | 100% |
| Cooling | Water-cooled (needs a recirculating cooler) |
| Wire size range | .030"–1/16" (0.8–1.6 mm) |
| Neck | 180° straight or 45°, screw-on |
| Nozzle | Slip-on |
| Connection | Euro |
| Cable lengths | 15 ft, 25 ft |
Good to know
- Needs the Universal Power Supply 080.9067 to run the pull motor (sold separately).
- Ships as a complete torch, set up for the wire size you choose.
Ships anywhere in Canada.
ABICOR Binzel® and ABIMIG® are trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG. TorchandTip.com is not affiliated with Illinois Tool Works Inc., The Lincoln Electric Company or ESAB. Miller® and Millermatic® are trademarks of Illinois Tool Works Inc. or its subsidiaries. Lincoln® is a trademark of The Lincoln Electric Company. ESAB® and Tweco® are trademarks of ESAB. These names identify the machines this torch connects to.