xFUME® PRO 24 Fume Extraction MIG Torch, 270 A
Pull the smoke away at the arc, not across the shop. The xFUME® PRO 24 is ABICOR Binzel®'s source-capture fume extraction MIG welding torch, rated 270 A CO₂ / 250 A mixed gas (M21) at 60% duty cycle. Fumes are drawn in through the shroud right at the weld and carried down the torch hose to your extraction unit, so the welder stays out of the plume and the arc stays in clear view.
Needs a high-vacuum extractor. The xFUME® PRO reaches full extraction power when it runs on a high-vacuum unit such as the xFUME® ADVANCED.
How a fume extraction torch works
Jim DiLeo of ABICOR BINZEL walks through the shroud, neck, handle and hose in just over three minutes.
Why the xFUME® PRO
- Lighter and stronger than the last generation. 10% more extraction power and 20% less weight than the previous xFUME® torches, thanks to a flow-optimized front end and interior.
- A handle built for the wrist. The lightweight handle has a rubberized grip, and a ball joint at its base lets the cable move on its own, taking weight off the wrist when you articulate.
- A 50° neck. A 50–60° bend gives the best flow and comfort in most welding positions.
- Your choice of trigger. Standard short trigger or extended trigger, whichever you prefer.
- Less gas loss. The optimized front end keeps shielding gas where it belongs while the shroud pulls fume.
Specifications
| Rating (EN 60974-7) | 270 A CO₂ / 250 A mixed gas (M21) |
| Duty cycle | 60% |
| Cooling | Air-cooled |
| Wire sizes offered | .024", .035", .040", .045" |
| Contact tip thread | M6 |
| Neck | 50° |
| Cable lengths | 10 ft, 12 ft, 15 ft, 20 ft, 25 ft |
| Cable type | Lightweight or full copper |
| Trigger | Standard or extended |
Choose your machine
Pick the connection that matches the welder or wire feeder the torch plugs into.
| Option | Fits |
|---|---|
| Miller | Miller® wire feeders and welders with the standard Miller® direct connection |
| Lincoln 10/74/84 | Lincoln® 10-series, Power Feed® 74 and 84 wire feeders |
| Lincoln Power MIG | Lincoln® POWER MIG® welders |
| Fronius / Euro | Fronius® machines, and any welder or feeder with a standard Euro connector |
Questions
Will it work without an extractor?
It will weld, but it won't extract fume. The torch is built to run on a high-vacuum fume extraction unit.
What contact tips does it take?
The xFUME® PRO 24 uses M6 thread contact tips.
Is it ready to weld out of the box?
Yes. It ships as a complete torch set up for the wire size, cable, trigger and machine connection you choose.
New to fume extraction? Watch ABICOR BINZEL's four-minute introduction: what welding fume does in the shop and how to start cleaning the air. Watch the video →
Ships anywhere in Canada.
xFUME® and ABICOR Binzel® are trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG. TorchandTip.com is not affiliated with Illinois Tool Works Inc., The Lincoln Electric Company, ESAB or Fronius International GmbH. Miller® and Hobart® are trademarks of Illinois Tool Works Inc. or its subsidiaries. Lincoln®, POWER MIG® and Power Feed® are trademarks of The Lincoln Electric Company. ESAB® and Tweco® are trademarks of ESAB. Fronius® is a trademark of Fronius International GmbH. These names identify the machines this torch connects to.