Pull a contact tip off a Tweco® MIG welding torch and you'll see something like 14-35 stamped on it. Look the same tip up on a distributor's site and it may be listed as 1140-1102. Same tip, two numbers. Here's how to read both, and what a pack should cost you.
The short number: series, then wire size
The stamped number is two parts. The first part is the tip series, which tells you which torch it fits. The second part is the wire size.
| Series | Fits |
|---|---|
| 11 | Tweco® No. 1 and Mini-MIG torches |
| 14 | Tweco® No. 2, 3 and 4 torches |
| 16S | Tweco® No. 4 torches, heavy-duty |
| 15H | Tweco® No. 5 torches, heavy-duty |
Letters after the series number change the tip style:
- H = heavy-duty (14H-35)
- T = tapered, for tight joints and a better view of the puddle (14T-35)
- HFC = heavy-duty flux-core (15HFC-116)
- AH = heavy-duty aluminum (14AH-364)
The number after the dash is the wire:
| Suffix | Wire |
|---|---|
| -23 | .023" |
| -30 | .030" |
| -35 | .035" |
| -40 | .040" |
| -45 | .045" |
| -52 | .052" |
| -364 | 3/64" |
| -116 | 1/16" |
| -564 | 5/64" |
| -332 | 3/32" |
| -764 | 7/64" |
So 14-35 is a standard 14 series tip for .035" wire, and 14T-45 is a tapered 14 series tip for .045" wire.
The long number: the catalogue code
The eight-digit number is the catalogue code for the same part. It follows its own pattern:
| Catalogue code | Short number |
|---|---|
| 1110-1102 | 11-35 |
| 1140-1102 | 14-35 |
| 1140-1202 | 14H-35 |
| 1140-1302 | 14T-35 |
The first four digits carry the series (1110 for the 11 series, 1140 for the 14 series). The next two carry the style: 11 for standard, 12 for heavy-duty, 13 for tapered. The last two carry the wire size, and in the 14 series they run in order:
| Last digits | Wire |
|---|---|
| 00 | .023" |
| 01 | .030" |
| 02 | .035" |
| 03 | .040" |
| 04 | .045" |
| 05 | .052" |
| 06 | 1/16" |
| 09 | 5/64" |
If a purchasing system or an old invoice only shows the long code, this is how you get back to the number on the tip. Search our store by the short number: 14-35, 11-45, 24A-50SS.
Nozzles, diffusers and insulators follow the same idea
Across the Tweco®-style range, the first digit tells you the part and the second tells you the torch:
- 2x = nozzle. 21 fits the No. 1, 22 the No. 2, 23 the No. 3, 24 the No. 4, 25 the No. 5.
- 5x = gas diffuser. 51 fits the No. 1, 52 the No. 2, 54A the No. 3 and No. 4, 55SW the No. 5.
- 3x = nozzle insulator. 32 fits the No. 2, 34A the No. 4, 35CT the No. 5.
On a nozzle, the number after the dash is the bore in hundredths of an inch: -37 is 3/8", -50 is 1/2", -62 is 5/8", -75 is 3/4". The letters after that tell you where the tip sits: F is flush, S is a 1/8" recess, SS is short stop. CT and FN are coarse and fine thread. So 24A-50SS is a No. 4 slip-on nozzle with a 1/2" bore and a short stop.
One that breaks the pattern: the Mini-MIG gas diffuser is 35-50. When in doubt, match the number on the part you're holding.
What a contact tip should cost
Genuine Tweco® tips are sold in packs of 25. Ours come in packs of 10. So the fair comparison is per tip, and per 10 tips, both in Canadian dollars.
| Tip | Genuine Tweco®, per tip | Binzel®, per tip | 10 tips, genuine | 10 tips, Binzel® |
|---|---|---|---|---|
| 11-35 (.035", No. 1 / Mini-MIG) | $2.13 | $0.70 | $21.30 | $7.00 |
| 14-35 (.035", No. 2, 3, 4) | $2.26 | $0.74 | $22.60 | $7.43 |
Genuine prices are Canadian distributors' listed prices for genuine Tweco® tips (listed per tip, sold in multiples of 25), checked November 8, 2026. Prices change; ours are live on each product page.
That's about 67% less per tip, for the same part number and the same wire size. And you buy 10 at a time, not 25. Our Tweco®-compatible tips, nozzles, diffusers and insulators are made by ABICOR Binzel®, the German welding torch maker.
Binzel® 14-35 contact tips, pack of 10 →
Binzel® 11-35 contact tips, pack of 10 →
Still not sure which tip you need?
Our MIG contact tip guide covers picking a tip and when to change it. If you don't know which front end your torch has, start with which MIG front end is on your welding torch.
Shop the full range. Contact tips, nozzles, gas diffusers, insulators and liners for Tweco® No. 1 to No. 5 and Mini-MIG torches, filterable by the torch you run. Shop Tweco®-compatible consumables →
TorchandTip.com sells ABICOR Binzel® MIG welding consumables across Canada. TorchandTip.com is not affiliated with, authorized by, or endorsed by ESAB®. Tweco® is a registered trademark of ESAB. All OEM names, model numbers, and part numbers are used for identification and reference purposes only.
0 comments