ABICOR Binzel® ABICLEANER 800 AC Weld Cleaning System, 120 V — Complete Set for Stainless TIG Welds

Clean TIG welds on stainless without pickling paste. The ABICOR Binzel® ABICLEANER 800 AC removes the heat tint from stainless steel TIG weld seams electrochemically: an electrolyte-soaked carbon fibre brush lifts the oxide layer and passivates the surface in the same pass. No grinding, no abrasives, and no hydrofluoric acid.

Need polishing as well? See the ABICLEANER 1000 AC/DC, which adds a DC polishing mode.

Why the ABICLEANER

• No paste to wait on. Brush the seam, rinse with water, done. No waiting for pickling paste to work and no neutralising.
• No hydrofluoric acid. The ABICLEAN all-in-one electrolyte cleans and passivates without the HF found in conventional pickling products.
• Reaches tight corners. The ABIBRUSH carbon fibre brush has about 1.5 million fine filaments that get into fillets and narrow gaps.
• One fluid for everything. The same electrolyte handles cleaning.

Specifications

What ships in the set

• ABICLEANER unit
• Grip handle with 4 m (13 ft) cable
• Ground clamp
• ABIBRUSH carbon fibre brush
• ABICLEAN all-in-one electrolyte
• Wide-mouth electrolyte container and water spray bottle
• Screw sleeve, protective cap and two open-end wrenches
• Storage box

Before you use it

Wear gloves, goggles and acid-resistant clothing, and work with ventilation or fume extraction. The electrolyte burns skin and eyes on contact, so rinse any splash with plenty of water. The brush and workpiece get hot. People with pacemakers should not operate the unit or stand near it. Indoor use only.

Spare brushes, PTFE sleeves, electrolyte, and replacement handle and ground clamp cables are sold separately. Ships anywhere in Canada.

Part number 192.0398.

ABICOR® and Binzel® are registered trademarks of Alexander Binzel Schweisstechnik GmbH & Co. KG.